Applications

Product search

    【 Heavy Fuel Oil 】

    Heavy Fuel Oil (HFO), also known as “residual fuel oil”, is based on the high viscosity, tar-like mass, which remains after the distillation and subsequent cracking of crude oil in order to produce lighter hydrocarbon products, such as petrol, distillate diesel fuels and heating oil or feedstocks for lubricants. In short, Heavy Fuel Oil is the residual heavy oil after the extraction of gasoline and diesel oil from crude oil.


    The main components are alkanes, cycloalkanes and different carbon hydrides. The boiling range is between 300°C and 700°C. The density of heavy oil is generally from 0.82 to 0.95, and the calorific value is around from 10,000 to 11,000 kcal/kg. Its characteristics are large molecular weight and viscosity. Due to its semi-fluid consistence, HFO has to be preheated to make it combustible in engines.


    RMA, RMB, RMD, RME, RMG or RMK are the international trade names.


    Cheap, but challenging

    As a residual product, HFO is a relatively inexpensive fuel – it typically costs 30% less than distillate fuels (MDO/MGO). It thus became the standard fuel for large marine diesel engines during the oil crisis in the 1970s and 1980s, and it required extensive adaptation of the injection system and other components of low and medium speed engines – which are still the only reciprocating engines capable of running on HFO.


    Most of our medium speed liquid fuel engines can burn heavy fuel oil (HFO). Of course, our medium speed dual fuel engines are capable of burning HFO in liquid fuel mode as well.


    Appendix: Heavy Fuel Oil Specification

    For HFO quality requirement, Please click here to download:HFO Specification.


    Heavy fuel oil specification
    • Property
    • Unit
    • Feature
    • Test method
    • Low Calorific value (LHV)
    • kJ/kg
    • min.
    • 42,700,ISO 3046/1
    • Viscosity (at 50 °C)
    • mm2/s (cSt)
    • max.
    • 700
    • Viscosity (at 100 °C)
    • mm2/s (cSt)
    • max.
    • 55
    • Density (at 15 °C)
    • kg/m3
    • max.
    • 1,010
    • Flash point
    • °C
    • min.
    • 60
    • Pour point
    • °C
    • max.
    • 30
    • Hydrogen sulfide
    • mg/kg
    • max.
    • 2
    • Acid number
    • mg KOH/g
    • max.
    • 2.5
    • Total sediment aged
    • mass %
    • max.
    • 0.10
    • Carbon residues (Conradson)
    • m%
    • max.
    • 20
    • Sulphur
    • m%
    • max.
    • 5
    • Ash
    • m%
    • max.
    • 0.15
    • Vanadium
    • mg/kg (=ppm)
    • max.
    • 450
    • Water
    • Vol.%
    • max.
    • 0.5
    • Aluminium and silicon
    • mg/kg
    • max.
    • 60
    • Asphalts
    • m%
    • max.
    • 2/3 of carbon residues(Conradson)
    • Sodium
    • mg/kg
    • Sodium < 1/3vanadium,sodium <100
    • Used lubricating oil (ULO)
    • mg/kg
    • Ca >30 and Zn >15or CA >30and P >15
    Note:

    All data provided on this site is for information purposes only, explicitly non-binding and subject to changes without further notice.


Return

Contact Us

  • Mobile:0769 83523198, 83523298
  • E-mail:sale@soarpower.com
  • 二维码Mobile QR code
WeChat
Contact
TOP
wechatCode WeChat